Ascenders & Descenders
-
ISC Figure of 8
ISC Classic Figure 8 Anodised.
-
ISC Micrograb
This ISC Ropegrab has a bolted axle and is made from High Stength Aluminium and has a non-aggressive Cam-face design. Frequently used for lanyard (flipline) adjusters.A Pip Pin version is also available (RP209). Refurb kits...
-
ISC Micrograb (Pip Pin)
The RP209 Ropegrab is fitted with a pip pin axle, making it quick and easy to attach/detach mid-line. A thumb operated push-button is used to disengage the Pip-pin mechanism and the axle has a chamfered end, to allow for easy location of the pin.
-
ISC Left Hand Ascender
All ISC Hand Ascenders have a coned (rather than spiked) camface design, to minimise rope wear.ISC Hand Ascenders are manufactured from solid Aluminium, for maximum durability.
-
ISC STRYDER Foot Ascender
During the design & development of the STRYDER, durability and functionality were at the top of the priority list! The STRYDER utilises tried & tested geometry, to provide a smooth upward movement and positive engagement on the rope.
STRYDER...
-
ISC Chest Ascender
The Chest Ascender is compact & lightweight and has been designed for use on a full body harness. Therefore it is ideal for use in Rope Access work.The cam is spring-loaded and fitted with a catch mechanism, allowing for ease one-handed operation of the device...
-
ISC Singing Tree Rope Wrench
The ISC Rope Wrench is a device that allows DRT (double rope techniques) to be performed whilst using a single rope. This is achieved by creating a bend above the climber’s hitch, which with the addition of the stiff tether creates a ‘contained doubled rope system’ that travels throughout the...
-
ISC D4 Work/Rescue Descender - 10.5 - 11.5mm rope
The D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam.The D4 has a...
-
ISC D5 Work/Rescue Descender - 12.5 - 13mm rope
The D5 Descender has been designed for use on 1/2" (12.7mm) rope. The D5 is EN12841:2006/C and is compliant with NFPA G and ANSI Z359.4:2013 and developed for the North American Fire & Rescue and Tower Climbing markets,...
-
Rope Wrench Tether 27cm with Rubber Stopper
This stiff tether is designed for the best performance of the Singing Tree Rope Wrench. It is made with Yale Bee-Line with multiple layers of heat shrink. It doesn't bend easily which forces your Rope...
