Safety Helmets

Safety Helmets
  • UNILITE VENTED SAFETY HELMET COMPLETE

    DESCRIPTION

    The Unilite TA570 (vented) ABS safety helmet (Type 1) with comfortable 6 point terylene head harness is the central building block providing users with a face, head and hearing certified protection system if needed. It is designed to protect wearers from numerous hazards and compliments a number of accessories.
    The unique crown cooling vents ensures cooler and more comfortable protection in humid conditions.The helmet consists of a shell and a suspension system called a harness. The shell provides the impact protection by deflecting, whilst the harness absorbs the shock and load. The transmission of force is dissipated through the shell, harness by stretching and dissipating it down through the body to the ground. The six point harness provides the cushioning by stretching and spreading the load evenly over the protected area.The 25mm wide webbing maximises the surface area contact with the wearer's head and enhances stability/security of the helmet. The area between the shell and harness is the shock absorption zone and should not be treated as a storage location when worn.


    APPLICATIONS

    Suitable for general use in industry for protection of the upper part of the wearers head. The TA570 (vented) safety helmet has been designed to meet the requirements of AS/NZS 1801 for shock absorption, resistance to penetration, lateral stiffness,
    ignition by flame and electrial insulation (electrical hazards up to 650V) when tested in the Hot (50°C), Cold (-5°C) and Wet conditions.Type 1 safety helmets are suitable for general industry, forestry, construction and mining.

    Code: HATCOMUY
    From: $114.64 inc GST
  • UNILITE VENTED SAFETY HELMET

    DESCRIPTION

    The Unilite TA570 (vented) ABS safety helmet (Type 1) with comfortable 6 point terylene head harness is the central building block providing users with a face, head and hearing certified protection system if needed. It is designed to protect wearers from numerous hazards and compliments a number of accessories.
    The unique crown cooling vents ensures cooler and more comfortable protection in humid conditions.The helmet consists of a shell and a suspension system called a harness. The shell provides the impact protection by deflecting, whilst the harness absorbs the shock and load. The transmission of force is dissipated through the shell, harness by stretching and dissipating it down through the body to the ground. The six point harness provides the cushioning by stretching and spreading the load evenly over the protected area.The 25mm wide webbing maximises the surface area contact with the wearer's head and enhances stability/security of the helmet. The area between the shell and harness is the shock absorption zone and should not be treated as a storage location when worn.


    APPLICATIONS

    Suitable for general use in industry for protection of the upper part of the wearers head. The TA570 (vented) safety helmet has been designed to meet the requirements of AS/NZS 1801 for shock absorption, resistance to penetration, lateral stiffness, ignition by flame and electrial insulation (electrical hazards up to 650V) when tested in the Hot (50°C), Cold (-5°C) and Wet conditions.Type 1 safety helmets are suitable for general industry, forestry, construction and mining.

    Code: HATUVY
    From: $20.30 inc GST
  • Protector Chin Strap

    Available for use with Protector brand safety helmets. The elasticised chinstrap helps keep the safety helmet secure and in place during active and windy situations.

    The chinstrap is fitted to the small lower attachment hold on each side of the helmet.

    Code: HXCS40
    $5.59 inc GST