Pulleys & Swivels

Pulleys & Swivels
  • The Omni-Block combines a swivel and pulley into one tool, and incorporates a unique sideplate that opens while the pulley is still attached to the anchor. Traditionally, a pulley is connected to a swivel by a carabiner. However, the Omni eliminates the need for the carabiner, reducing length and pieces of equipment in the rigging system. The short length of the Omni is important when used in high-angle, confined space or other space-sensitive rigging environments. The reduced weight of the Omni will make hauling your gear easier. Additionally the Omni sideplate can be opened without detaching from the carabiner. Traditional pulleys require removing from the carabiner to change the rope. With the Omni, the user is able to do this while the pulley is still secured.

    • Allows rope change without detachment from carabiner
    • The integrated swivel top allows the pulley to orient as needed in response to the load.
    • Pulley body is machined from a solid block of aluminum for strength optimization and weight reduction.
    • Shortens the length of rigging by combining the pulley and swivel in one device.
    Code: 30676
    $195.50 inc GST
  • The Omni-Block combines a swivel and pulley into one tool, and incorporates a unique sideplate that opens while the pulley is still attached to the anchor. Traditionally, a pulley is connected to a swivel by a carabiner. However, the Omni eliminates the need for the carabiner, reducing length and pieces of equipment in the rigging system. The short length of the Omni is important when used in high-angle, confined space or other space-sensitive rigging environments. The reduced weight of the Omni will make hauling your gear easier. Additionally the Omni sideplate can be opened without detaching from the carabiner. Traditional pulleys require removing from the carabiner to change the rope. With the Omni, the user is able to do this while the pulley is still secured.

    • Allows rope change without detachment from carabiner
    • The integrated swivel top allows the pulley to orient as needed in response to the load.
    • Pulley body is machined from a solid block of aluminum for strength optimization and weight reduction.
    • Shortens the length of rigging by combining the pulley and swivel in one device.
    Code: 30677
    $138.00 inc GST
  • Description

    • Ultra compact, lightweight pulley
    • Designed for hauling systems and deviations
    • Sheave mounted on self-lubricating bushings for good efficiency

    Specifications

    • Rope compatibility: 7 to 13 mm
    • Sheave diameter: 21 mm
    • Ball bearings: no
    • Efficiency: 71 %
    • Maximum working load: 2,5 kN x 2 = 5 kN
    • Weight: 75 g
    • Certification(s): CE EN 12278

     

    Code: P03A
    $35.59 inc GST
  • PETZL TANDEM®

    Description

    • Aluminum sheaves mounted on self-lubricating bushings for efficiency
    • Accepts up to three carabiners to facilitate use

    Specifications

    • Rope compatibility: diameter: 13 mm or less
    • Sheave diameter: 21 mm
    • Ball bearings: no
    • Efficiency: 71 %
    • Maximum working load: 10 kN
    • Weight: 195 g
    • Certification(s): CE EN 12278

     

    Code: P21
    $86.25 inc GST
  • PRO TRAXION

    Very efficient loss-resistant progress capture pulley

    The PRO TRAXION progress capture pulley was designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. The side plate locks when loaded to prevent the pulley opening during use. The lower connection point can be used to create different types of hauling systems.

    Description

    • Loss-resistant pulley:
      - allows a rope to be installed when the pulley is connected to the anchor
    • Well suited for hauling heavy loads:
      - large diameter aluminum sheave mounted on sealed ball bearings for excellent efficiency
      - side plate locks when loaded and prevents opening of the pulley during use
    • Versatile:
      - lower connection point for creating different types of hauling systems
      - toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes)
      - may be used as simple pulley by locking the cam in the raised position

     

     

    Code: P51
    $182.16 inc GST
  • DMM Hitch Climber Pulley Rapide

    The DMM Hitch Climber Rapide Triple Attachment Pulley is an even more efficient version of our popular Hitch Climber Pulley. It combines a small three hole rigging plate with a pulley as before, but the pulley spins on a high efficiency roller bearing making it even smoother and therefore much more efficient in a full range of applications. It can obviously be used as a standard pulley, but the additional holes allow it to be guided or controlled without adding any complication into the system.

    All the edges are rope and textile friendly allowing direct attachment that minimises bulk and maximises versatility.

    A deep grooved, contact sealed roller bearing gives maximium efficiency and minimal maintenance requirement.

    An integral part of the DMM/Teufelberger 'Hitch Climber' set up developed in conjunction with Treemagineers.

    More information on tree climbing applications can be found in 'The Hitch Climber's Guide to the Canopy' at www.treemagineers.com

    Code: PUL100RAPIDE
    $101.20 inc GST
  • DMM Hitch Climber Pulley

    The DMM Triple Attachment Pulley combines the high efficiency of our pulleys with a small three hole rigging plate to give an extremely versatile piece of equipment. It can obviously be used as a standard pulley, but the additional holes allow it to be guided or controlled without adding any complication into the system.

    All the edges are rope and textile friendly allowing direct attachment that minimises bulk and maximises versatility.

    Pre-lubricated Oilite bushing give minimal efficiency losses and minimal maintenance requirements.

    An integral part of the DMM/Teufelberger 'Hitch Climber' set up developed in conjunction with Treemagineers.

    More information on tree climbing applications can be found in 'The Hitch Climber's Guide to the Canopy' at www.treemagineers.com

    Code: PUL100RD
    $80.50 inc GST
  • DMM Pinto and Pinto Rig Pulleys

    With hardly a straight line in sight, the hot forged curves and fairlead flares of our Pinto Pulley make for an ultra efficient, 'textile friendly' environment.

    Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).

    An indispensable component of the DMM/Teufelberger CE lanyard system, but equally at home on all other mechanical advantage systems or lifelines.

    Comes with minimum fuss, highly efficient Oilite bushings.

    Spacers are available to support the anchor holes when textile connecting elements compress the side plates.

    Slightly larger than the Pinto and accommodating a larger rope size, the Pinto Rig also has a high efficiency roller bearing giving ultra smooth operation.

    Code: PUL110
    From: $75.27 inc GST
  • DMM Pinto and Pinto Rig Pulley Spacers

    An essential component for Pinto and Pinto Rig applications where textile connecting elements tend to compress the side plates.

    Features:

    • Hole diameters 15mm
    • Two widths: 12mm and 14mm

     

     

    Code: PUL110-SPA
    From: $14.40 inc GST
  • ART Cocoon 2 is equipped with two high quality SKF ball bearings and serves as a reliable and sturdy part of PPE. It is unique in form and function and although mainly designed to be used with the Ropeguide, when connected with a sling or a loop runner it can also be used within other applications like an in-line anchor.
    Code: RE71C
    $245.99 inc GST
  • ISC Small Eiger Aluminium Pulley

    ISC lightweight Eiger Pulleys are made from high strength Aluminium and are fitted with tamper-proof rivets.

    ISC Eiger Pulleys are fitted with Bushings, which are ideal in lightweight applications.

    Code: RP012
    $36.80 inc GST
  • ISC Small Double Eiger Aluminium Pulley

    A high quality swing sided double micro pulley.

    ISC lightweight Eiger Pulleys are made from high strength Aluminium and are fitted with tamper-proof rivets.

    ISC Eiger Pulleys are fitted with Bushings, which are ideal in lightweight applications.

    Code: RP030
    $83.95 inc GST