Carabiners - Aluminium

Carabiners - Aluminium
  • DMM Revolver - Wiregate

    The Revolver wiregate has a lower profile gate than the others in the family so suits applications where the connector needs rotating or inverting within a small eye or loop and where a locking connector is not required.

    Can be carried on a harness or in a pocket and with negligible weight penalty and is best used as an addition to PPE rather than as a replacement in rescue and work situations.

     

    Features:

    • Conforms to EN12275:1998 and UIAA121:2009
    • Unique and legendary connector incorporates low friction roller system
    • I-Beam section for increased strength to weight ratio
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Individually marked for traceability

     

    Code: A238
    $51.75 inc GST

  • DMM Sentinel - Locksafe

    The DMM Sentinel is a super short, ergonomically shaped multi functioning carabiner that is especially useful when compact systems are important. The kinked back fits neatly in the hand and gives impressive gate clearance for a connector of this size. The flattened basket clips well into wide webbing minimising any side pinching and of course, the I-beam section gives increased strength to weight ratio. All in all, a classic compact connector which excels when clipping smaller diameter components to wider webbing. The Locksafe system and the snag-free keylock nose/gate interface completes the package.

     

    Features:

    • Approved to EN362:2004/B
    • Small ergonomic shape gives wide gate clearance for a compact connector
    • I-Beam section for increased strength to weight ratio
    • Keylock clean nose for snag free connection
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Recommended for general use
    • Individually marked for traceability

     

    Code: A267
    $43.25 inc GST
  • DMM Revolver - Screwgate

    The Revolver Screwgate is most suited to (but not limited to) Rope Access or recreational climbing and can be carried on a harness or in a pocket and with negligible weight penalty.

    Perfect for lots of rescue situations such as counterbalance or snatch rescues for example.

     

    Features:

    • Conforms to EN362:2004/B
    • Unique and legendary connector incorporates low friction roller system
    • I-Beam section for increased strength to weight ratio
    • Keylock clean nose for snag free connection
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Recommended for special applications including rescue and hoisting
    • Available in Black, Olive and Sand in our Tactical range
    • Individually marked for traceability

     

    Code: A272
    $67.85 inc GST
  • DMM Revolver - Locksafe

    The Revolver with a Locksafe gate forms a neat 'semi-captive' interface with many of our treecare components such as our Rigging Hubs and Anchor Rings. This limits the risk of the connector from flipping over or cross loading, making them indispensable in remote or fixed rescue systems.

     

    Features:

    • Conforms to EN362:2004/B
    • Unique and legendary connector incorporates low friction roller system
    • I-Beam section for increased strength to weight ratio
    • Keylock clean nose for snag free connection
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Recommended for special applications including rescue and hoisting
    • Available in Black, Olive and Sand in our Tactical range
    • Individually marked for traceability

     

    Code: A277
    $67.85 inc GST
  • DMM Shadow - Locksafe

    The DMM Shadow offset D is the most compact locking connector in the DMM Professional range and it is impressively strong for it's size and weight. Perfect in any confined space or tower climbing situation where the overall weight and size of a system is crucial. Hot forged I-beam back for increased strength to weight ratio.

     

    Features:

    • Conforms to EN362:2004/B
    • Small Offset D shape provides a very lightweight but strong connector
    • I-Beam section for increased strength to weight ratio
    • Keylock clean nose for snag free connection
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Ideal for general use when weight saving is important
    • Available in Black, Olive and Sand in our Tactical range
    • Individually marked for traceability

     

    Code: A307
    $43.20 inc GST
  • DMM ULTRA O - LOCKSAFE

    The ultra light, clean nose DMM Ultra O oval carabiners are the mainstay of our carabiner market, and for good reason. Not only do they give high strength to weight ratios and feel great in the hand, they also help to keep components of a system aligned. The deep symmetrical basket allows pulleys, webbing, ropes and even other carabiners naturally sit centrally in the oval basket but still allow easy stacking of components on either side. Any weight transfer then happens without any unnerving jumps associated with offset and D shaped carabiners.


    Features:

    • Approved to EN362:2004/B
    • Also available pre-drilled with a captive bar option conforming to EN362:2004/T
    • Oval shape allows central positioning of devices
    • I-Beam section for increased strength to weight ratio
    • Keylock clean nose for snag free connection
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Recommended for use with pulleys and as a general connector
    • Individually marked for traceability

     

    Gate Closed StrengthGate OpeningWeight
    25kN22mm73g
    Code: A327
    $41.90 inc GST
  • DMM ULTRA O - LOCKSAFE

    Multipack (Blue, Red, Green)


    The ultra light, clean nose DMM Ultra O oval carabiners are the mainstay of our carabiner market, and for good reason. Not only do they give high strength to weight ratios and feel great in the hand, they also help to keep components of a system aligned. The deep symmetrical basket allows pulleys, webbing, ropes and even other carabiners naturally sit centrally in the oval basket but still allow easy stacking of components on either side. Any weight transfer then happens without any unnerving jumps associated with offset and D shaped carabiners.

    Features:

    • Approved to EN362:2004/B
    • Also available pre-drilled with a captive bar option conforming to EN362:2004/T
    • Oval shape allows central positioning of devices
    • I-Beam section for increased strength to weight ratio
    • Keylock clean nose for snag free connection
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Recommended for use with pulleys and as a general connector
    • Individually marked for traceability

     

    Gate Closed StrengthGate OpeningWeight
    25kN22mm73g

     

    Code: A327-P3
    $105.00 inc GST
  • DMM AERO HSM LOCKSAFE

    A classic HMS shape connector at an impressive price point. The DMM Aero is elegant, voluminous and simple to use in most working at height applications. The pear shape allows Munter or Italian hitches to freely rotate in use making the changeover between 'taking in' and 'feeding out' as seamless as possible. The large rounded basket allows pulleys and connectors to self-centre and minimizes the chance of unnerving connector jumps as you change loading between various connection points. The Taperlock snag free nose profile eliminates 'catch up' on wires and slings when clipping and un-clipping.

    Features

    • Approved to EN362:2004/B
    • HMS shape provides large internal volume and gate clearance
    • I-Beam section for increased strength to weight ratio
    • Patented Taperlock clean nose for increased gate push in and side resistance
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Recommended as a belaying carabiner in conjunction with dynamic nylon ropes
    • Individually marked for traceability

     

    WeightGate OpeningGate Closed Strength
    91g19mm25kN

     

    Code: A367
    $41.90 inc GST
  • DMM RHINO LOCKSAFE

    A highly evolved and resilient creature available in Screwgate, Quicklock and Locksafe. Cross loading could be a thing of the past. The new Rhino Belay Biner will be of interest for work at height and arborist specialists. The horn feature on the leading edge of the spine significantly reduces carabiner cross loading with rigging, devices and pulleys. The clean nose design provides snag-free loading and unloading of ropes. The big robust top bar is contrasted by our signature I beam construction on the non-rope bearing surfaces resulting in a total weight of 72g.

     

    Features

    • Approved to EN 362:2004/B and EN 12275:2013
    • Horn feature reduces the risk of cross loading
    • Wide, full radius basket provides a rope and device friendly operation
    • I-Beam construction for high strength and low weight
    • Keylock clean nose for snag free connection
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Uniquely marked for traceability

     

    Gate Closed StrengthGate OpeningWeight
    27kN19mm80g
    Code: A547
    $39.82 inc GST
  • Boa 30kN Locksafe Carabiner

     

    The Locksafe version is our most popular connector in treecare applications due to its amazing versatility.


    Features

    • Approved to EN362:2004/B
    • Also available pre-drilled with a captive bar option conforming to EN362:2004/T
    • A massive 30kN breaking load
    • Large HMS shape provides increased internal volume and gate clearance
    • I-Beam section for increased strength to weight ratio
    • Taperlock clean nose for increased gate push in and side resistance
    • Hot forged and fully heat treated aluminium for lightness and maximum strength
    • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
    • Recommended as a belaying carabiner in conjunction with dynamic nylon ropes
    Code: A897
    $46.00 inc GST
  • Multipurpose light alloy carabiner, large base and wide sizes, with triple-lock gate:

    • large base and wide clearance;
    • strong section with great resistance that makes it ideal for rope maneuvers with heavy loads;
    • catch-free nose to avoid snagging when clipping and unclipping.

     

    Code: CTKORA1
    $36.80 inc GST
  • This is the aluminium screwgate version of the KH204SS ISC HMS Supersafe Carabiner
    Code: KH204SGB1
    $28.75 inc GST