Adventure Park Supplies

Adventure Park Supplies
  • ISC Zipspeed Tandem Trolley - 50mm wheel diameter

     

    The NEW Zipspeed Tandems represent industry leading Zipline Trolley innovation at its most affordable!
    The design of this mid-sized trolley uses state of the art engineering techniques to ensure that the Trolley will run and run!

    The Zipspeed Tandems are fitted with rubber sealed, deep groove bearings for optimal performance and a lifespan of several thousand miles/km. The side plates are made from Aerospace Grade 7075 Aluminium, to minimise flex. We have also introduced a rubber brake buffer to help to absorb the impact at the end of the run. The main attachment point is large enough to accommodate a wide variety of Carabiners & Snaphooks. There are extra attachment holes for a secondary lanyard and a small central hole which can be used to fit an accessory (handle bar etc).


    We offer versions for 13mm (1/2"), 16mm (5/8") or 20mm (3/4") Wire and the centre redundancy axle is fitted with a colour coded collar, for easy identification.

    Also great for a speedline.

     

    (MBS) Minimum Breaking Strength (kN)40
    (MBS) Minimum Breaking Strength (lbf)8992
    Wheel materialStainless steel
    FinishAnodised
    Weight (grams)875







    Code: RP075A
    From: $225.93 inc GST
  • ISC Zipspeed Trolley - 75mm wheel diameter

    The NEW Zipspeed Tandems represent industry leading Zipline Trolley innovation at its most affordable!

    The design of these mid-sized trolleys uses state of the art engineering techniques to ensure that the Trolley will run and run!

    The Zipspeed Tandems are fitted with rubber sealed, deep groove bearings for optimal performance and a lifespan of several thousand miles/km. The side plates are made from Aerospace Grade 7075 Aluminium, to minimise flex. We have also introduced a rubber brake buffer to help to absorb the impact at the end of the run. The main attachment point is large enough to accommodate a wide variety of Karabiners & Snaphooks. There are extra attachment holes for a secondary lanyard and a small central hole which can be used to fit an accessory (handle bar etc).

    We offer versions for 13mm (1/2"), 16mm (5/8") or 20mm (3/4") Wire and the centre redundancy axle is fitted with a colour coded collar, for easy identification.

    Also great for a speedline.

     

    (MBS) Minimum Breaking Strength (kN)40
    Wheel materialStainless steel
    FinishAnodised
    Weight (grams)1793

     

    Code: RP076A
    From: $284.14 inc GST
  • P.O.A. Contact us for a price on 06 368 2494 or info@timbersaws.co.nz

    The SmartSnap is designed for use on Ropes Courses, where 100% attachment is required. The SmartSnap offers 100% attachment through the use of innovative 'Key Lock' mechanisms. To move from one element to another, the user must lock in a second connector, before being able to unlock the first connector.

    This simple and user friendly device is suitable for frequent use.

    Please view the video tab for a demonstration of the SmartSnap in use on a Ropes Course.

     

    Weight (grams)318
    Compatible with steel cable diameter (mm)9 -13
    Number of persons1
    Body materialAluminium
    Rope guide materialStainless steel
    FinishAnodised
    ColourGrey
    (MBS) Minimum Breaking Strength (kN)25
    (MBS) Minimum Breaking Strength (lbf)5620

     

    Code: RP420
    From: $27.58 inc GST
  • The ALF Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on their way around a High Ropes/Challenge course.

    The ALF is also a protection solution for workers on towers, masts, wind turbines and even in constrution applications where a cost-effective, temporary climb assist solution is required for short duration working. In the event of a fall, the ALF Pulley locks on quickly to arrest the fall. As fall distances are extremely small, it is extremely unlikely that the user will be incapacitated. However if necessary, a rescue can be easily organised from ground level.

    The ALF has been field trialled and cycle tested by over 4000 users with no detriment to performance and with little or no wear. The Alf has been extensively drop tested, in line with both CE EN360 and ANSI Z359. The unit has also been tested with weights other than those required for CE and ANSI Standards and has been statically pulled to destruction, making it probably the safest Climb Assist product in the world!

    The unit can be rigged in a continuous loop system, using a Large Single Prussik Pulley (Aluminium) [Part Code RP066]

    Code: RP430
    $529.00 inc GST